Grundfos Multistage Pump CRE 5-9 2.2 kW

CRE 5-9 A-A-A-E-HQQE

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to “Min.” or “Max.” operation or to “Stop”. The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
• “Power on”: Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
• “Warning”: Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
• “Alarm”: Motor has stopped (flashing red indicator lights).

Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as “Actual value”, “Speed”, “Power input” and total “Power consumption”. The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required:
• two dedicated digital inputs
• three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5-3.5 V
• 5 V voltage supply to potentiometer and sensor
• one analog output, 0-10 V, 0(4)-20 mA
• two configurable digital inputs or open-collector outputs
• two Pt100/Pt1000 inputs
• LiqTec, dry-running protection sensor input
• Grundfos Digital Sensor input and output
• 24 V voltage supply for sensors
• two signal-relay outputs (potential-free contacts)
• GENIbus connection
• interface for Grundfos CIM fieldbus module.

LIQUID:

Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

TECHNICAL:

Pump speed on which pump data are based: 3501 rpm
Rated flow: 6.9 m³/h
Rated head: 68 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS,ACS
Curve tolerance: ISO9906:2012 3B

MATERIALS:

Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC

INSTALLATION:

Maximum ambient temperature: 50 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Type of connection: Oval / Rp
Size of inlet connection: 1 1/4 inch
Size of outlet connection: 1 1/4 inch
Pressure rating for connection: PN 16
Flange size for motor: FT115

ELECTRICAL DATA:

Motor standard: IEC
Motor type: 90LD
Rated power – P2: 2.2 kW
Power (P2) required by pump: 2.2 kW
Over/undersize motor: Standard motor size
Mains frequency: 50 / 60 Hz
Rated voltage: 3 x 380-500 V
Rated current: 4.15-3.40 A
Cos phi – power factor: 0.93-0.87
Rated speed: 360-4000 rpm
IE Efficiency class: IE5
Motor efficiency at full load: 90.1 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor No: 98190193

CONTROLS:

Frequency converter: Built-in
Pressure sensor: N

OTHERS:

Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.57
Net weight: 32.8 kg
Gross weight: 35.7 kg
Shipping volume: 0.143 m³
Danish VVS No.: 385942609
Finnish LVI No.: 4925685
Country of origin: HU
Custom tariff no.: 84137090

Downloads

> Download the Grundfos Range

> Download the Grundfos CRE Vertical Multistage Brochure

Link to the OEM

> Visit the Official Grundfos CRE website